As a Denver-based custom home builder working on clients’ lots across the Front Range and mountain foothills, RKM Homes evaluates siding choices against Colorado’s specific climate stresses: high UV exposure at altitude, wide temperature swings, frequent hail, heavy snow loads in some neighborhoods, and varying wildfire risk depending on location. Those factors change how materials age and what maintenance they demand. Whether you prefer the authentic texture of natural wood or the low-maintenance longevity of engineered products, the right choice should be driven by exposure, code and insurance requirements for your lot, and how much upkeep you want over the next 20–30 years.
Cedar shake delivers warm, natural character that many homeowners seek for custom builds — good insulation value, a traditional look that we often specify for mountain-style homes, and the ability to be shaped or stained on site. In Colorado, untreated cedar will weather more quickly under strong UV and sun, and it’s vulnerable to moisture-related issues if not installed with a proper rainscreen and flashing system; expect periodic sealing or staining (commonly every 3–5 years in high-UV exposures) and vigilant maintenance to prevent checking, rot, or insect damage. Cedar is also combustible unless treated or installed with defensible-space measures, which matters in wildland-urban interface areas where building codes and insurance may require fire-resistant options.
Composite shake products — including fiber cement and polymer-based shakes — are engineered to resist rot, insects, and UV fading, and they typically carry longer manufacturer warranties and lower routine maintenance requirements than natural cedar. Fiber cement is noncombustible and highly impact resistant (beneficial in hail-prone Denver neighborhoods) but heavier and often requires specialized cutting and installation; polymer shakes are lighter and resist moisture but vary in thermal performance and finish quality. For RKM Homes clients we weigh aesthetics, upfront cost, long-term maintenance, local exposures, and HOA or code restrictions to recommend the best siding system for your lot and desired maintenance profile — and we tailor installation details (rainscreen, flashing, and fire treatments) to maximize performance no matter which material you choose.
Which siding—cedar shake or composite shake—is safer in Colorado wildfires and how do local codes and insurance shape that choice?
As a custom home builder working across the Denver metro and mountain communities, I treat fire performance as a leading decision factor. Untreated cedar is organic and can ignite from embers; some cedar can be pressure‑treated or factory fire‑retardant treated, but those treatments have limitations (they can weather over time and sometimes affect stain/paint options). Many composite options — fiber‑cement shakes or certain engineered polymer shakes — are available with Class A or high fire‑resistance ratings and are inherently less likely to ignite from wind‑borne embers. In Colorado’s wildfire-prone areas, ember exposure and radiant heat are the common failure modes, so materials that resist ember intrusion and carry a verified fire rating give you a measurable safety advantage.
Here’s what to do practically before you pick a siding: first, check with your local building department whether your lot sits in a wildland‑urban interface or subject to specific ignition‑resistant construction requirements, and get any list of approved materials or code citations in writing. Second, ask manufacturers for the exact fire‑rating and test reports for the product you’re considering and require those to be part of the bid. Third, call your insurer and request a written statement or quote showing whether the material will affect coverage or premiums — many carriers either restrict combustible cladding in high‑risk zones or charge higher rates unless mitigation measures are in place. If you prefer cedar for aesthetics, insist on certified fire‑retardant treatment and understand any re‑treatment schedule and how that affects the warranty.
Installation and documentation change outcomes as much as material choice. Ember‑resistant detailing — sealed joints, noncombustible flashings, ember‑resistant vents, and no gaps at roof-to-wall transitions — reduces the chance of ignition regardless of cladding. Require your contractor to follow manufacturer installation guides and provide a signed installation checklist you can share with your insurer or building inspector. From a builder’s standpoint, in many Colorado neighborhoods the cleanest path to code compliance and acceptable insurance is a Class A composite or fiber‑cement shake; treated cedar can work, but only when verified, properly detailed, and budgeted for ongoing maintenance and re‑treatment.
How will cedar shake or composite shake siding hold up to Colorado’s UV, freeze–thaw, moisture, hail and insect exposure?
From my experience building across Denver and the Front Range, UV is one of the biggest degraders of exterior siding here — high elevation and intense sun will gray and break down a bare cedar surface within a few years. Cedar will bleach, check and lose surface oils quickly unless you commit to a UV-stable stain or paint and reapply on sun‑exposed elevations every 2–4 years; lighter colors help reduce heat absorption. Many composite options (polymer shakes, fiber cement, engineered wood with a factory finish) include UV inhibitors or color-through formulations that hold up far better — ask vendors for accelerated UV test data and look at several years of installed samples in Colorado conditions before deciding.
Freeze–thaw and moisture movement are important even in Colorado’s relatively dry climate because of big day/night temperature swings, snow loading and spring melt. Cedar expands and contracts with moisture and temperature, which leads to gap formation, cupping and split ends unless you detail a ventilated rainscreen, maintain a 1/4″–3/8″ shingle exposure clearance, and keep siding several inches above finish grade. Composite products vary: fiber cement is dimensionally stable and resists rot but will absorb moisture at cut edges unless sealed; engineered wood needs primed cuts and good drainage to avoid swelling. Whatever you choose, specify housewrap, a rainscreen gap (furring strips or rain mat), continuous drip edges at horizontal transitions, and protected lower walls under snow/ice exposure.
Hail and insects are neighborhood-specific hazards in Colorado. I’ve seen cedar shakes split or splinter after golf‑ball hail; fiber cement panels tend to resist denting but can crack on point impacts, while thick polymer shakes usually show the best impact resilience. Cedar’s natural oils deter some insects, but carpenter bees and woodpeckers still target exposed shakes; composite materials are effectively insect‑proof. Practical steps: in hail‑prone areas favor impact‑rated composites or thicker fiber cement and inspect contractor samples after local storms; keep vegetation trimmed away from walls, maintain a 6–8″ clearance from soil, and ensure all cut edges and butt joints are sealed to deny moisture and insect access.
What maintenance and long-term lifecycle costs should I expect for cedar shake vs composite shake siding in Colorado?
As a builder who works on Colorado homes, I tell clients that cedar shake demands a predictable, recurring maintenance program to stay looking and performing well. On exposed south‑ and west‑facing elevations you should plan to restain or reseal every 3–5 years (less exposed walls often stretch to 5–7 years). Expect annual walk‑around inspections for cracked shakes, split ends, loose fasteners and failing caulk, and budget for spot repairs — replacing a handful of shakes is common every few years; larger patching or partial re-roofing-style work shows up after 15–25 years depending on exposure. Practical dollar guidance: for a typical custom home envelope, plan on $1,500–$5,000 every 3–5 years for refinishing and minor repairs, and recognize that cumulative maintenance over 30 years will be materially higher than a low‑maintenance product.
Composite shakes (fiber cement, engineered wood composite or polymer) significantly lower routine maintenance. Most composites don’t require periodic staining — fiber cement or engineered products usually need a repaint only every 10–20 years if painted, and polymer boards typically only need occasional washings and caulk/fastener checks. Because they resist rot and insects and are less susceptible to UV loss of dimensional integrity, you’ll be doing far fewer repairs; budget roughly $500–$2,000 every 10–15 years for repainting, caulking and minor touch‑ups on a typical home. Over a 30–year horizon, expect lifecycle maintenance costs for composite to be on the order of 30–70% lower than cedar, depending on how often you choose to recoat cedar for appearance reasons.
If you want practical next steps: pick the product that fits how much time and money you want to spend maintaining the house. If you choose cedar for the look, specify clear‑grade Western red cedar or factory‑primed/factory‑finished shakes, design with generous overhangs and a rain‑screen gap, use stainless fasteners, and schedule a maintenance contract (inspection + reseal) so it doesn’t get neglected — I tell clients to set aside the 3–5 year refinishing dollars up front. If low maintenance is a priority, insist on a high‑quality composite with UV‑stable pigments, confirm paint warranties and fastener compatibility, and plan for simple caulk/clean cycles rather than frequent restaining. Keep receipts and a maintenance log either way — it helps preserve warranty coverage, simplifies insurance conversations and improves resale value.
How do upfront cost, warranties, insurance premiums and resale value compare between cedar shake and composite shake siding for Colorado homes?
As a custom home builder in Denver I tell clients to compare true installed costs, not just sticker prices. In my experience cedar shake typically runs higher for installation because of more labor-intensive cutting, fitting and finishing; expect rough ballpark ranges of about $8–$14 per sq. ft. installed for quality cedar shakes depending on complexity, removal of old siding and required prep work. Composite options (fiber‑cement or engineered polymer shakes) commonly land in the $6–$12 per sq. ft. installed range. When you get bids, demand an itemized breakdown that separates materials, removal/haul, substrate or sheathing repairs, specialty flashing, and finish work — those line items are where estimates diverge and where you can negotiate.
Warranties and insurance are areas where the differences matter most in Colorado. Natural cedar usually has little to no manufacturer warranty for performance (the wood itself is “as is”), while many composite products carry 25‑ to 50‑year limited warranties covering cracking, rot and often color retention; read the fine print for what’s excluded (hail, freeze‑thaw failure, labor, or finish fade). Also insist on a contractor installation warranty (1–5 years) and get warranty documents in writing before work begins. For insurance, cedar shakes can increase perceived fire risk in wildfire‑prone areas and some carriers either surcharge or won’t insure homes with untreated wood shakes; composite and fiber‑cement frequently qualify for lower premiums or better underwriting. Before you choose siding, call your insurer and get a written premium comparison for both materials — a few hundred dollars a year difference compounds over time and can change the math.
Think of resale and lifecycle cost together rather than chasing the cheapest upfront bid. Cedar’s authentic look often attracts buyers and can be a curb‑appeal plus in certain neighborhoods, but ongoing costs (regular staining/painting, replacement of damaged boards, and mitigation for insect or moisture issues) can add substantially to 20‑ to 30‑year ownership costs. Composite shakes usually require far less maintenance and often outlast cedar, so their higher or similar upfront cost can produce a lower total cost of ownership and be an easy selling point to buyers concerned about maintenance and wildfire exposure. Practical steps: get three detailed bids, obtain manufacturer and installer warranties in writing (and check transferability), secure a written insurance quote for each material, and document maintenance for future resale — those items will let you compare apples to apples when deciding what’s best for your Colorado home.
How should cedar or composite shake siding be installed in Colorado, and what should I ask my contractor?
As a custom home builder I tell every homeowner to expect a contractor who can produce a written installation plan before work starts. That plan should show the manufacturer’s fastening schedule, recommended nail type and length, required back‑priming or end‑sealing for natural wood, and any expansion/gap details for composite products. Ask to see copies of the specific product installation instructions and a sample mock‑up on site so you can confirm how starter courses, corner returns, window/door flashing and roof intersections will be detailed; the contractor should sign off that their methods match the manufacturer’s instructions to avoid voiding the warranty.
Pay attention to the small but critical installation details that differ between cedar and composite shakes. Both need a continuous weather‑resistive barrier and a ventilated rainscreen (furring strips or engineered batten) to prevent trapped moisture, but cedar requires back‑priming of cut edges and slightly larger reveal spacing to accommodate shrinkage, while many composites require slotted or oversized fastener holes and deliberate expansion gaps. Require corrosion‑resistant, ring‑shank or manufacturer‑specified fasteners (stainless or hot‑dip galvanized) driven flush but not over‑driven, appropriate flashing at every horizontal joint and roofline, and factory or field trim that matches the product profile so joints are neat and watertight.
Hire a contractor with local Colorado references who can demonstrate both hands‑on experience with your chosen material and administrative competence. Ask for at least three nearby projects you can visit, proof of manufacturer certification if applicable, copies of permits they’ll pull, and documentation of proper silica‑dust controls and PPE if they will cut fiber‑cement on site. Put a clause in the contract requiring a pre‑paint or pre‑finish inspection, a photographed final inspection of detail work (flashing, starter course, and termination points), and a clear warranty handoff procedure so you know who to call if trim or fasteners settle after the first winter.

